18June2012
FreeCommXE 591 (still) has a bizarre selection bug.
I often hit END or HOME and then want to do SHIFT + UP or DOWN
to select the last/first item & the next item & etc ...
SHIFT + UP or DOWN normally selects the highlighted item &
the preceding/next item - 1 at a time every time pressed;
however, if I do END or HOME & then do SHIFT + UP or DOWN,
FrCXE will highlight/select ALL items EXCEPT the last/first item ...
This happens whether or not NC-Mode is enabled.
I also do not like how FrCXE deselects ALL items
(except the 1 still under the highligher)
after doing a COPY operation, for example,
WHEN NC-Mode is enabled.
FrCXE does NOT do this when when NC-Mode is NOT enabled ...
591 - END or HOME then SHIFT + UP or DOWN selection bug
591 - END or HOME then SHIFT + UP or DOWN selection bug
Long-time FreeComm fan
Hope I've "added value" to FrC
Hope to help keep/make FrC worthwhile to Marek
Hope I've "added value" to FrC
Hope to help keep/make FrC worthwhile to Marek
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
I can confirm this, and it must be a bug. It is independent of NC-Mode setting for me, too. (FC-XE 595; Win7 x64.)AEN007 wrote:FreeCommXE 591 (still) has a bizarre selection bug.
I often hit END or HOME and then want to do SHIFT + UP or DOWN
to select the last/first item & the next item & etc ...
SHIFT + UP or DOWN normally selects the highlighted item &
the preceding/next item - 1 at a time every time pressed;
however, if I do END or HOME & then do SHIFT + UP or DOWN,
FrCXE will highlight/select ALL items EXCEPT the last/first item ...
This happens whether or not NC-Mode is enabled.
My result is a bit different than described. Here is what I observed using END:
The selection will be from wherever the focus began in the list to the item just before the last one.
So for a list of 9 items, if the focus starts on item 5 > END > Shift+Up = the selected items are 5-8 inclusive.
The expected result is items 8-9 will be selected.
Compare this with another method which works correctly:
Focus starts on item 5 > DOWN 4 times (focus is on item 9) > Shift+Up = the selected items are 8-9 (as expected).
Last edited by Scott_Y on 25.06.2012, 05:29, edited 1 time in total.
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
I can confirm this as well; exactly the same for me. (FC-XE 595.)AEN007 wrote:I also do not like how FrCXE deselects ALL items
(except the 1 still under the highligher)
after doing a COPY operation, for example,
WHEN NC-Mode is enabled.
FrCXE does NOT do this when when NC-Mode is NOT enabled ...
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
Fixed for the release 596.
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
7July2012
Greetings.
I recently noticed that 591 also has this "deselects all" problem
when NC-Mode is NOT active but FLAT file view is active ...
Also, it seems there is not (yet) a way to change/use custom views when in FLAT file view.
Selecting FLAT file view always (re)sets the view to the default I set under Column profiles.
Changing the column profile after selecting FLAT file view causes FrCXE to lose the FLAT view ...
Also related to NC-Mode is»
and
Greetings.
I recently noticed that 591 also has this "deselects all" problem
when NC-Mode is NOT active but FLAT file view is active ...
Also, it seems there is not (yet) a way to change/use custom views when in FLAT file view.
Selecting FLAT file view always (re)sets the view to the default I set under Column profiles.
Changing the column profile after selecting FLAT file view causes FrCXE to lose the FLAT view ...
Also related to NC-Mode is»
Another selection "bug" is»AEN007 wrote:26May2011Another bug I have encountered is»AEN007 wrote:I played around with the NC-mode under "Select items".
NC-mode seems to have to some bugs.
If I select 1 or 2 or x items, then move to a folder and hit enter to go into that folder
(maybe because I want to copy/move the selected items into that folder),
FrCXE will not go into the folder when I hit enter
but rather will execute the default action for the selected items.
This does NOT happen when I do the exact same & NC-mode is NOT in effect ...
and another selection "bug" is»AEN007 wrote:19February2012
Greetings.
Yesterday I found the latest FrCXE.570 ...
If I go between tabs or panes, already highlighted/selected items are not immediately responsive.
For example, I have to hit F2(Rename) at least twice.
e.g., if I hit the Shift-BS hotkey combo, the sticky quick-find box does not close ...AEN007 wrote:Maybe it would be useful/simple if the "quick-find" box would close when users hit the SHIFT key.AEN007 wrote:One specific I can give is that when users hit SHIFT & UP or DOWN, the "quick-find" box should close!AEN007 wrote:26May2011
The FreeComm "sticky" (non-search file find? - what is this feature called?) is unique & great.
I do not have to quickly type all the characters of the file name I would like FC to find/highlight;
however, I often find that it is TOO sticky ...
I don't (at the moment) have anything more specific to input/suggest but
wish that somehow the feature was not SO sticky ...
that I did not always have to hit ESC to toggle off the feature ...
The "quick-find" box is not case sensitive, so SHIFT has no use in the "quick-find" box.
Seems to me also that the "quick-find" box could/should close when the user hits F2 {rename} ...
and
AEN007 wrote:8March2012
Greetings.
latest thoughts/input ...
FrCXE does not hightlight the copied/moved item in the pane where it was copied/moved.
There is the "Select only file name" setting, but I need/use both ...
It would be nice if there was a way to hotkey either name only or name.ext ...
I have found/seen the "Always overwrite without prompt" on the WinCopy dialog,
but my input for consideration is "no prompt & no dialog".
Many times I want to copy/move with "no prompt & no dialog".
I almost never need/want the/a dialog.
Other times I could/would use a "with prompt" hotkey ...
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
9August2012
The following»I hit F2 and then maybe hit {HOME} -
expecting the edit cursor to move to the begin of the item on which I hit F2,
but FrCXE often has not invoked F2 because I have not hit F2 twice,
and so FrCXE executes {HOME} on the selection panel and not the edit cursor ...
and then maybe I hit {DEL} - and of course FrCXE does not delete the first character but ...
The following»
has started to annoy me so much that I tweaked 1 of my persistent AHK scripts»AEN007 wrote:Another selection "bug" is»AEN007 wrote:19February2012
Greetings.
Yesterday I found the latest FrCXE.570 ...
If I go between tabs or panes, already highlighted/selected items are not immediately responsive.
For example, I have to hit F2(Rename) at least twice.
Code: Select all
#IfWinActive, FreeComm ahk_class TFcFormMain
F2::Send {F2 2}
expecting the edit cursor to move to the begin of the item on which I hit F2,
but FrCXE often has not invoked F2 because I have not hit F2 twice,
and so FrCXE executes {HOME} on the selection panel and not the edit cursor ...
and then maybe I hit {DEL} - and of course FrCXE does not delete the first character but ...
Re: 591 - END or HOME then SHIFT + UP or DOWN selection bug
6Januar2013
NC-Mode is also called "sticky selection" but the above behavior is totally "unsticky" ...
I have also noticed that the FrCXE "Invert selection" options are (no longer) functioning perfectly.
The problem seems to be with the item/file in the first row.
FrCXE selects the 1st row when it should not and
does not select the 1st row when it should ...
The issue described here seems to persist.AEN007 wrote:I also do not like how FrCXE deselects ALL items
(except the 1 still under the highligher)
after doing a COPY operation, for example,
WHEN NC-Mode is enabled.
FrCXE does NOT do this when when NC-Mode is NOT enabled ...
NC-Mode is also called "sticky selection" but the above behavior is totally "unsticky" ...
I have also noticed that the FrCXE "Invert selection" options are (no longer) functioning perfectly.
The problem seems to be with the item/file in the first row.
FrCXE selects the 1st row when it should not and
does not select the 1st row when it should ...
Who is online
Users browsing this forum: No registered users and 49 guests